What is HomeLink®?

Deptford drivers considering a new Chevy will most likely see HomeLink® as an available feature. What is HomeLink®? This innovative home automation brand has its technology embedded in most new Chevy models to let you activate your Deptford smart home devices before you leave your car. For many, this includes the fan-favorite HomeLink® garage door opener.

Pellegrino Chevrolet will tell you everything you need to know about HomeLink® and how to program it. If you have a problem with your system, our service technicians will ensure your success on the road ahead.

The Benefits of HomeLink®

So, what is HomeLink® exactly, and what are its benefits? HomeLink® is a system integrated into your Chevy Silverado or Suburban that allows you to remotely activate smart home devices using a combination of radio frequency and wireless cloud-based transmission. For many, the HomeLink® garage door opener function is the main appeal. When you choose a Chevy with HomeLink®, you’ll enjoy benefits such as:

• Ease of Use: Connecting your vehicle to your home is simply a matter of pressing a few buttons.
• Compatibility: HomeLink® is compatible with just about all garage door openers and gate systems, as well as a wide range of other radio-frequency (RF) controlled devices.
• Control Up to Three Devices: Tastefully integrated into your vehicle’s interior, the HomeLink® system allows you to control up to three devices.
• Safety & Security: With most compatible garage door openers, the system will let you know if your garage door has been left open or closed. HomeLink® apps also allow you to have remote control over other in-home devices, such as the lights and security system, providing you with an extra level of peace of mind when you’re traveling through West Deptford.
• Battery-Free: Since HomeLink® is powered by the electrical system in your Chevy, you’ll never have to worry about changing batteries.

How Do I Program HomeLink®?

Programming your HomeLink® garage door opener is quick and easy! Just follow these steps to connect HomeLink® to your door-opening system:

1. The HomeLink® unit features three buttons and is commonly located on the ceiling of the car above the center console. Press and hold down the first and third buttons until the HomeLink® light begins to flash. This usually takes about 10 seconds. Note that pressing the first and third buttons is the master reset, so you do not need to do this when subsequently adding other devices.
2. Release the HomeLink® buttons and grab your current garage door opener device. Make sure it has a full battery and is functioning properly.
3. Press and hold the HomeLink® button you wish to program while simultaneously pressing the open/close button on your garage door opener. The HomeLink® light will start flashing slowly. Do not release either button until the HomeLink® light stops flashing or flashes rapidly.
4. Press the HomeLink® button you’ve just programmed. If your garage door uses a fixed code to operate, pressing this button should activate your garage door. If your garage door uses a rolling code, your HomeLink® light will flash rapidly when pressed, indicating there are a few more steps to take before programming is complete.
5. For garage door openers with rolling codes, have a second person enter your garage and find the “Learn” or “Smart” button on the device. Press this button until your garage door opener indicates it’s ready for pairing.
6. Press the programmed HomeLink® button on your car for a minimum of two seconds. You may see the lights on your garage door opener flash, indicating it is connecting. You may need to press and release the HomeLink® button up to three times for the garage door to connect.

Learn More About Chevy Tech at Our Westville Dealership

Woodbury drivers deserve a top-notch Chevy experience. Thankfully, HomeLink® technology is just one way you’ll know you made the right choice by choosing Chevy. Contact the service professionals at Pellegrino Chevrolet with your Chevy technology questions or simply schedule service to get seen.